200lb Gravity Feeder W/2 In 1 Round Legs + Hover to Zoom

BOSS BUCK

Item # Bb1200ap

200lb Gravity Feeder W/2 In 1 Round Legs

Available Quantity: 3

$239.99

- +
In-Store Pickup Only
Description
These 200 lbs Protein Wildlife feeders are the best! This maintenance FREE patented Hopper design gives you the flexibility to Gravity feed protein in the Spring & Summer and converts over to an Automatic feeding system in the Fall and Winter months. The Custom Designed head features a 10° angle, and a 1 in overhang on the 4 in I.D. feed ports. Each feed port has a drain hole to disperse any water that enters the tip of the feed port. Our patented design features an internal cone that dispenses the feed evenly to the three ports. The 3-Way inner sleeve allows the user to control the feed flow of almost all feed shapes and sizes. Push it all the way up to virtually shut off the flow, or ease it down until you get the optimal flow on your favorite type of critter food. This is the most user friendly, versatile Wildlife feeder system on the market today. Our double walled hatch lid tops this unit off in style, and function. It allows the hopper system to breathe thus eliminating condensation while achieving ambient temperature faster than Steel or Fiberglass feeders. These feeders are great for remote location feeding where access is limited to ATV`s and foot access only. Deploy the Boss Buck 200# feeders in those out of the way honey holes for excellent results!
Required tools: 7/16 socket
Provided Hardware: (3) 1/4-20x1` bolts (3) washers (1) steel thumb screw
1) Open lid and locate feeder neck inside your Boss Buck 200# feeder hopper, along with (3) 1/4-20x1` bolts (3) washers provided for mounting.
2) To attach feeder neck: Lay feeder hopper on its side. From the inside of feeder, drop neck through open hole on bottom end of feeder hopper. Align triangular slot on feeder neck with triangular slot on bottom end of feeder hopper, and insert. Threaded inserts in the neck will line up to corresponding holes in feeder hopper.
3) Insert bolts (with washer attached) into matching threaded inserts on neck and tighten. DO NOT OVER